遙控卷簾門安裝時有哪些事情是要做好的呢？只有做正確的操作，注意正確的事項，才能順利安裝順利使用。對此，濟南卷簾門廠家的相關人士是這樣講的：

What are the things to do when installing the remote control rolling shutter door? Only by doing the correct operation and paying attention to the correct matters, can the installation and use be smooth. In this regard, the relevant personnel of Jinan roller shutter door manufacturer said:

一、量需要的卷簾門尺寸：我們需要根據自己的實際場所具體尺寸為準?？梢酝ㄟ^(guò)水平尺進行測量。我們需要注意的是遙控卷簾門的高度需要高于門框的高度，因?yàn)檫@樣在安裝的時候更加方便，測量好尺寸后就可以讓卷簾門廠家定做合適的卷簾門。

1、 The required size of roller shutter door: We need to be based on the specific size of our own actual site. It can be measured with a level ruler. What we need to pay attention to is that the height of the remote control roller shutter door needs to be higher than the height of the door frame, because it is more convenient to install. After measuring the size, the roller shutter door manufacturer can customize the appropriate roller shutter door.

二、檢查電源是否正確：在遙控卷簾門的焊接前，要確定在通入遙控卷簾門的的三項電源是否都正確，這是保障卷簾門能夠正常使用的關鍵性因素。

2、 Check whether the power supply is correct: before welding the remote control rolling shutter door, make sure whether the three power supplies connected to the remote control rolling shutter door are correct, which is the key factor to ensure the normal use of the rolling shutter door.

三、焊接安裝遙控卷簾門：將定做好的遙控卷簾門與轉軸焊接好，并將遙控卷簾門與門框固定安裝，需要注意的是，門洞口兩側地面要預留凹槽，經校正合格后，固定木楔。

3、 Welding and installation of remote control roller shutter door: weld the fixed remote control roller shutter door with the rotary shaft, and fix the remote control roller shutter door with the door frame. It should be noted that grooves should be reserved on the ground at both sides of the door opening, and the wooden wedges should be fixed after the calibration is qualified.

四、檢查遙控卷簾門：卷簾門安裝好后，我們需要仔細檢查是否安裝符合要求，尤其是卷簾門放下來的時候是否有卡頓或是不受控制這樣的情形發生，同時還需要注意的是，是否是將門洞封閉好沒有縫隙。

4、 Check the remote control roller shutter door: after the roller shutter door is installed, we need to carefully check whether the installation meets the requirements, especially whether the roller shutter door is stuck or out of control when it is put down. At the same time, we need to pay attention to whether the door opening is closed without gaps.

五、準備安裝工具：遙控卷簾門在安裝前我們需要準備好安裝卷簾門的工具，梯子、鉆頭、螺絲刀、水平尺、電鉆機等工具，將這些工具放在安裝卷簾門方便拿到的位置，準備安裝遙控卷簾門。

5、 Preparation of installation tools: Before the installation of the remote control roller shutter door, we need to prepare the tools for installing the roller shutter door, such as ladders, drill bits, screwdrivers, level rules, electric drills, etc., and put these tools at the convenient positions for installing the roller shutter door. We are ready to install the remote control roller shutter door.

遙控卷簾門安裝時的正確做法我們從五個方面進行講解到的，您對此有什么注意事項可以隨時來我們網站http://www.loveinbaby.com咨詢了解！

We explained the correct way to install the remote roller shutter door from five aspects. If you have any precautions, please visit our website at any time http://www.loveinbaby.com Ask about it!