車庫門遙控器失靈解決辦法

Solution to Garage Door Remote Control Malfunction

　　如果車庫門遙控器失靈，可以嘗試以下解決辦法：

If the garage door remote control fails, the following solutions can be tried:

　　檢查電池。更換新電池，看是否可以恢復正常工作。

Check the battery. Replace the battery and see if it can resume normal operation.

　　檢查遙控器的接頭。如果接頭松動或脫落，可以重新連接或擰緊。

Check the connector of the remote control. If the connector is loose or detached, it can be reconnected or tightened.

　　檢查電路連接線。如果電路連接線松動或斷裂，可以使用雙頭線插頭重新連接。

Check the circuit connection wires. If the circuit connection wire is loose or broken, a double ended plug can be used to reconnect.

　　污垢或增加硬紙片。如果是因?yàn)閮?nèi)部結垢導致接觸不良，只需污垢即可；如果是因?yàn)殡娐防匣瘜?dǎo)致接觸不良，可以剪一小塊硬紙片，墊在橡膠墊與電路板的按鍵之間。

Remove dirt or add hard paper. If poor contact is caused by internal scaling, simply remove the dirt; If the poor contact is caused by circuit aging, you can cut a small piece of hard paper and place it between the rubber pad and the buttons on the circuit board.

　　重新配碼。可以嘗試重新對碼另外一個按鍵，或者聯系人員進行檢修修理。

Re code. You can try resetting the code to another button, or contact a professional for maintenance and repair.

　　此外，還可以通過拔電重插、重新調行程、更換電機等方法解決。如果以上方法都沒有解決問題，可能是主控制電路板出現故障，建議聯系人員進行檢修修理。

In addition, it can also be solved by unplugging and reinserting, readjusting the stroke, replacing the motor, and other methods. If none of the above methods solve the problem, it may be a malfunction of the main control circuit board. It is recommended to contact professional personnel for maintenance and repair.

本文由濟南車庫門為您精心提供，如想了解更多請點擊我們的網站：http://www.loveinbaby.com，我們將會以的熱情為您解答！

This article is carefully provided by Jinan Garage Door. If you want to learn more, please click on our website: http://www.loveinbaby.com We will answer you with the greatest enthusiasm!